- This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
- The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
- The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
- These discs can be adjusted on the rod according to the length of the pipette
- The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
-
Pipette Stand (Vertical)
-
Pipette Stand (94 Pipettes- Rotary)
- This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
- The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
- The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
- Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
- This stand can be easily disassembled & reassembled.
-
Pipette Stand (Horizontal)
- This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position
- This autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene
- This stand can be easily disassembled for space saving storage.
-
Pipette Pump
- Presenting a fast release pipetting device for precise pipetting & zip quick emptying
- The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip- quick emptying
- The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes
- It resists acids & alkalies and can be easily disassembled for thorough cleaning.
-
Pipette Controller- Can fill 25 ml pipette under 4 seconds
- Safety valve and hydrophobic filters provide double protection against fluid penetration
- Two different speed modes - High & Low along with Gravity drain
- The pump speed can also be fine-tuned by varying finger pressure on operating knobs for better control of speed
- Cadmium free environment friendly NiMH batteries
- Batteries can be changed very easily by the user
- The intelligent charger prevents over charging / heating of batteries
- Low battery indicator
- The specially designed Desk top Stand enables the Pipette Controller to be charged while resting on it.
- The Pipette Controller can hold the serological pipette while resting on Desk top Stand.
Technical Data:Power : 2 x 1.2 V / 1000 mAh NiMH batteries Battery Service Life : Eight hours continuous use Battery Charging Time : 2 - 3 hours to charge fully Volumetric Range : Plastic or Glass pipette from 0.1 ml up to 200 ml Safety System : Replaceable hydrophobic 0.45 pm PTFE filter Safety check valve Standard Accessory : Battery charger (UK plug) : Desktop Stand : Hydrophobic PTFE membrane filter 0.45 μm 1Pc : Hydrophobic PTFE membrane filter 0.20 μm 1Pc : Wall mounting stand with screw -
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
Pipette Box
- Made of Polypropylene
- This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
- The top of the box screws on the bot tom and the height can be adjusted by screwing the top.
-
Pipettes, Gerber, Milk (New)
- Used for testing milk by the Gerber method.
- Are one-mark transfer Pipet tes for measuring 10.75 ml
- Also be used in rural Milk Collection Centres
-
Pipettes, Bacteriological, Graduated
- Used for the bacteriological examination of milk
- 1.1 ml is graduated at 0.5 and 1.1 ml
- 2.2 ml is graduated at 1.0, 2.0, 2.1 and 2.2 ml
-
Graduated Pipette (Serological), CLASS-B • These Pipettes are manufactured which are calibrated to deliver as per ASTM E-1044 • Printed in amber colour enamel
-
Graduated Pipettes (Mohr), CLASS-B These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293 and is printed in amber colour enamel.
-
Graduated Pipette (Serological), CLASS-A, UNSERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- With batch certificate
-
Graduated Pipette (Serological), CLASS-A, SERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- Comes with individual work certificate
-
Graduated Pipettes (Mohr), CLASS A UNSERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with batch certificate
-
Graduated Pipettes (Mohr), CLASS-A, SERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with Individual work Certificate
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With batch certificate
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With Individual work Certificate
- Printed in amber colour
-
Graduated Pipettes Type 3 (Serological), Class AS
- Compliance with USP Standard
- With batch certificate
-
Graduated Pipette (Serological), CLASS-AS • Calibrated to deliver in compliance with USP Standard • Printed in amber colour enamel • With Individual work certificate
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • With batch certificate
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • Comes with individual work certificate
-
- Complies with DIN 12264
- Unprinted sockets to avoid getting printed charred
- Smooth grinding surface finish to avoid leakage
* Non DIN -
- Manufactured from PP
- Outstanding chemical resistant
- Autoclavable with maximum operating temp of 135° C
-
- Made of Polypropylene
- Are corrosion free
- Can hold funnels with dia 3" to 6"
- Extra plate provided can be placed to hold funnels bearing dia 1" to 3"
- Two tapered wedges ensure firm grip on Rods having dia 1/2" or 3/8"
-
- Made of Polypropylene
- Non-corrosive front opening provides clear view of the solution, Allows unobstructed placement of separating funnels.
- Two tapped wedges ensures firm grip on rods having dia 1/2" or 3/5"
-
- Made of Polypropylene
- Provides excellent contact clarity & Strength
- Is per shaped & autoclavable
- has leakproof screw cap threadded
- PP stopcock fitted with self lubricating PTFE plug, is push fitted to the stem of funnels
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- With stem inside cone
-
- Available with PE stopper
- With socket and cone
-
- Available with PE stopper
- With socket and cone
-
- Available with PE stopper
- With socket and cone
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with PE stopper
- Complies with ISO 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with PE stopper
- Complies with ISO 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with PE stopper
- Complies with ISO 4800 Standards
-
- Available with PE stopper
- Complies with ISO 4800 Standards
* Non DIN -
- Available with PE stopper
- Complies with ISO 4800 Standards
* Non DIN -
- Available with PE stopper
- Complies with ISO 4800 Standards
-
- Made from ASTM E-438, TYPE-1, CLASS - A BORO 3.3 glass
- Compliance with ASTM E - 1096 Standard
- The flasks come with PTFE KEY STOPCOCK and PE stopper
- The flasks are printed in white colour enamel
-
- Compliance with ISO 4800 standards
- With Graduation
- With PE Stopper
-
- Compliance with ISO 4800 standards
- Without Graduation
- With PE Stopper
-
- Compliance with ISO 4800 standards
- With Graduation
- With PE Stopper
-
- Compliance with ISO 4800 standards
- Without Graduation
- With PE Stopper
-
- Compliance with ISO 4800 standards
- With Graduation
- With PE Stopper
-
- Compliance with ISO 4800 standards
- Without Graduation
- With PE Stopper
-
- Made of Polypropylene
- Light weight
- Easy to clean & autoclavable
- Top portion snap fitted with the lower one forms a vaccum seal which requires no greasing
- Base of the top portion has perforated filter plate
-
- Funnels is Made from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Funnels are made from thick wall and comes with bidded rim
- Printed in white colour enamel
-
- Made from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Printed in white color enamel
- Made from thick wall and comes with bidded rim
-
- Made from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Comes with fire polished rim and stem
-
- Made of Polypropylene
- Used for convenient filling of carboy's, drums & barrels
-
- Made of Polypropylene
- Used for transferring powdered reagent
- Unique parallel stem minimizes bridging of powder
- Autoclavable at 120° C
-
- Made of Polypropylene
- 600 cone angle and external ribs to prevent air lock
- can also be steam autoclaved
-
- Made from ASTM E 438 TYPE 1 CLASS A BORO 3.3 GLASS
- Compliance with ASTM E-1095 standards
- Comes with fire polished rim and stem
-
- Made from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Available with con
-
- With 60° bowl angle for precise fitting of filter paper
- Manufactured from chemical and heat resistant pyrex borosilicate glass
- Stem length approximately 150mm
-
- Made from ASTM E 438 TYPE 1 CLASS A BORO 3.3 GLASS
- Compliance with DIN ISO 4798 & USP standards
* Non DIN -
- Blown in Polypropylene, are strong, unbreakable and have good contact clarity.
- These autoclavable flasks are provided with screw caps to prevent leakage.
- Material : Polypropylene
-
- These flasks are made as per ASTM E-288, Class-B
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Unserialized Specification
- The flasks have diamond graduated line and are calibrated TC (to contain)
- It comes in white colour enamel printing
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- These comes in white colour enamel printing
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel
- With Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E 288 Class A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel
- With Individual work Certificate and Serial Number
* Non ASTM
-
- Compliance with USP (United States Pharmacopia) Standard
- With Conformity Batch Certificate
- With PE Stopper
-
- Compliance with USP (United States Pharmacopia) Standard
- With Individual work Certificate and Serial Number
- Qr Coded Flask
- With PE Stopper
-
- Compliance with USP (United States Pharmacopia) Standard
- With Batch Certificate
- With PE Stopper
-
- Compliance with USP (United States Pharmacopia) Standard
- With Individual work Certificate and Serial Number
- Qr Coded Flask
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Hollow glass Stopper
-
- Compliance with ISO 1042 Standards
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Hollow glass Stopper
-
- Compliance with ISO 1042 Standards
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Batch Certificate
- With Hollow glass Stopper
-
- Compliance with ISO 1042 Standards
- With Individual Work Certificate and Serial Number
- Qr Coded Flask
- With Hollow glass Stopper
-
- Compliance with ISO 1042 Standards
- With Batch Certificate
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Individual Work Certificate and Serial Number
- Qr Coded Flask
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Batch Certificate
- With Glass Hollow Stopper
-
- Compliance with ISO 1042 Standards
- With Individual Work Certificate and Serial Number
- Qr Coded Flask
- With Glass Hollow Stopper
-
- Compliance with DIN/ISO 1042 Standards
- With Batch Certificate
- With PE Stopper
-
- Compliance with DIN/ISO 1042 Standards
- With Individual Work Certificate and Serial Number
- Qr Coded Flask
- With PE Stopper
-
- Made of silicon
- Available with stand slip free mechanism
- Can withstand temp. upto 280°C
-
- Gives stair like top view
- Every step provides excellent suppor t to the round bot tom flask
- Can hold round bot tom Flasks up to 10 Ltr. capacity
- Autoclavable
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Suitable for determination of Nitrogen
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used for the Determination of Nitrogen
- Complies with DIN 12360
* Non DIN
-
- With 2mm glass stopcock and a spring retention device for smooth turning purpose.
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with DIN 12383
- Side neck at an angle of 25°
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Compliance with ASTM E-1403 Standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used for Semi Micro Distillation Manufactured
- Complies with DIN 12383
* Non DIN -
- Flat Flange and Interchangeable Joint
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Wide Mouth
- With Flat Flange, 100 mm ID, 150 mm OD
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Complies with DIN 12392 & USP standard
- Centre Neck and Three Parallel Side Neck
- With Interchangeable Joints
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass.
PS: All 4 Neck Flasks can be provided in ASTM joint sizes on request -
- Complies with DIN 12392 & USP standard
- Centre Neck & Three Angled Side Necks
- With Interchangeable Joints
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass.
PS: All 4 Neck Flasks can be provided in ASTM joint sizes on request These flasks can also be provided in other joint sizes -
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available Three Neck Parallel
- Complies with ASTM & USP standard
These flasks can also be provided in other joint sizes -
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available Three Neck Parallel
- Complies with DIN 12392 & USP standard
PS: All 2 Neck and 3 Neck Flasks can be provided in ASTM joint sizes on request -
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available with three neck angular
- Complies with ASTM & USP standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available with three neck angular
- Complies with DIN 12394 & USP standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with DIN 12394 & USP standard
- Has Two Neck Parallel
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Round bot tom flask with ASTM joint sizes
- Angular
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with DIN 12394 & USP standard
- Available with two neck angular
PS: These flasks can also be provided in other joint sizes
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with DIN / ISO 4797 & USP standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- These Flasks comes with Ground Joint manufactured as per ASTM E-1403 type 1 specifications
- The Flasks are printed in white colour enamel
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ISO 24450
- With beaded rim
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ISO 1773
- With beaded rim
* Non DIN
-
- These Flasks comes with Ground Joint manufactured
- ASTM E-1403 type 1 specifications
- The Flasks are printed in white colour enamel
-
- Complies with DIN / ISO 4797 and USP standard
* Non DIN
PS: These flasks can also be provided in other joint sizes -
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- With beaded rim
- Complies with DIN/ISO 24450
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- With beaded rim
- Complies with DIN/ISO 1773
* Non DIN
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Ideal for determining the dissolution characterism of drugs in capsules and tablets
- Graduated in interval of 50ml
- Smooth hemispherical base
- Confirms to all requirements of USP
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used in Rotary Evaporator
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used in Rotary Evaporator
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- With 19/26 Joint
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ASTM E-133, ASTM D-86, D-233, D-801 & D 802
* Non ASTM
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used for Preparation of Culture in Nutrient Media
- Suitable for use in Polenske Apparatus
* 3000 ml not covered in standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Ideal for Use of in preparation of culture
- The four equidistant baf fles provide consistent agitation when used with compatible orbital shakers
- Suitable for repeated autoclave cycles at 121°C