- Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass
- These Flasks comes with Ground Joint manufactured as per ASTM E-1404, Type 2, Class-1 requirement
- The Flasks are printed in white colour enamel
-
-
- Made from ASTM E-438 Type 1, Class A, Boro 3.3 glass
- These flasks are made from thick wall and have reinforced thick beaded rim
- The flasks are produced to meet ASTM E-1404, TYPE-1 specifications
- All the flasks are printed in white enamel
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used in Rotary Evaporator
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used in Rotary Evaporator
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- With beaded rim
- Complies with DIN/ISO 1773
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- With beaded rim
- Complies with DIN/ISO 24450
-
- Made of silicon
- Available with stand slip free mechanism
- Can withstand temp. upto 280°C
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Determination of Iodine with ground joint and stopper
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Suitable for determination of Nitrogen
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used for the Determination of Nitrogen
- Complies with DIN 12360
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with DIN 12383
- Side neck at an angle of 25°
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ISO 1773
- With beaded rim
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ISO 24450
- With beaded rim
-
- Gives stair like top view
- Every step provides excellent suppor t to the round bot tom flask
- Can hold round bot tom Flasks up to 10 Ltr. capacity
- Autoclavable
-
- Available in Silicon Sleeve and fibre Glass yarn to resist direct flame
- Hold Flask upto 2 Liters (60 mm OD).
- Made of Stainless Steel
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Ideal for determining the dissolution characterism of drugs in capsules and tablets
- Graduated in interval of 50ml
- Smooth hemispherical base
- Confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Complies with DIN ISO 3585 & USP standard
- Smooth hemispherical base
- Graduated in interval of 50ml
- Vessels confirms to all requirements of USP
-
- Wide Mouth
- With Flat Flange, 100 mm ID, 150 mm OD
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ISO 1773
- All the flasks are printed in white enamel
- Has Reinforced thick Rim to reduce chipping & breakage
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Compliance with ISO 24450
- All the flasks are printed in white enamel
- Has Reinforced thick Rim to reduce chipping & breakage
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used for Preparation of Culture in Nutrient Media
- Suitable for use in Polenske Apparatus
 * 3000 ml not covered in standard
-
- Complies with DIN / ISO 4797 and USP standard
* Non DIN
PS:Â These flasks can also be provided in other joint sizes -
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ISO 1773
- All the flasks are printed in white enamel
- Has Reinforced thick Rim to reduce chipping & breakage
* Non DIN
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with DIN 12394 & USP standard
- Available with two neck angular
PS: These flasks can also be provided in other joint sizes
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Round bot tom flask with ASTM joint sizes
- Angular
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with DIN 12394 & USP standard
- Has Two Neck Parallel
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available Three Neck Parallel
- Complies with ASTM & USP standard
These flasks can also be provided in other joint sizes -
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available Three Neck Parallel
- Complies with DIN 12392 & USP standard
PS: All 2 Neck and 3 Neck Flasks can be provided in ASTM joint sizes on request -
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available with three neck angular
- Complies with DIN 12394 & USP standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Available with three neck angular
- Complies with ASTM & USP standard
-
- Complies with DIN 12392 & USP standard
- Centre Neck & Three Angled Side Necks
- With Interchangeable Joints
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass.
PS: All 4 Neck Flasks can be provided in ASTM joint sizes on request
These flasks can also be provided in other joint sizes -
- Complies with DIN 12392 & USP standard
- Centre Neck and Three Parallel Side Neck
- With Interchangeable Joints
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass.
PS: All 4 Neck Flasks can be provided in ASTM joint sizes on request
-
- These Flasks comes with Ground Joint manufactured
- ASTM E-1403 type 1 specifications
- The Flasks are printed in white colour enamel
-
- Made of Polypropylene
- Autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths
- Easy to load
- Essential in microbiology & immunology labs.
- Surface of the rack has raised alpha - numeric index for easy identification and has a ventral rod handle for convenient lifting.
-
- Agronomic Design
- In compliance with Din 12254 standard
- Used mainly with volumetric flasks the F lower-PowerTM form large head provides good grip and also protects flasks from breaking if it drops accidentally
- Available in Multiple Color against Anaquel 100 Pieces
-
- Made of Polypropylene
- Are corrosion free
- Can hold funnels with dia 3" to 6"
- Extra plate provided can be placed to hold funnels bearing dia 1" to 3"
- Two tapered wedges ensure firm grip on Rods having dia 1/2" or 3/8"
-
- Made of Polypropylene
- Light weight
- Easy to clean & autoclavable
- Top portion snap fitted with the lower one forms a vaccum seal which requires no greasing
- Base of the top portion has perforated filter plate
-
- Made from ASTM E 438 TYPE 1 CLASS A BORO 3.3 GLASS
- Compliance with DIN ISO 4798 & USP standards
* Non DIN -
- With 60° bowl angle for precise fitting of filter paper
- Manufactured from chemical and heat resistant pyrex borosilicate glass
- Stem length approximately 150mm
-
- Made from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Available with con
-
- Made from ASTM E 438 TYPE 1 CLASS A BORO 3.3 GLASS
- Compliance with ASTM E-1095 standards
- Comes with fire polished rim and stem
-
- Made from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Comes with fire polished rim and stem
-
- Made of Polypropylene
- 600 cone angle and external ribs to prevent air lock
- can also be steam autoclaved
-
- Manufactured from 3.3 Borosilicate glass
- Produce many gases
- User friendly
-
Filter holder with glass filter support for 47mm Disc Replacement Parts:
Cat No. Description 258.245.01 Glass funnel, 300 ml, borosilcate 260.245.02 Base for 47 mm glass/filter holder 258.245.02 Spring clamp, 47 mm, aluminum 260.245.05 No. 8 perforated stopper, silicone -
Stainless Screen Glass Filter Holder
Optional AccessoriesCat No. Description 258.245.01 Glass funnel, 300 ml, borosilicate 258.245.02 Spring clamp, 47 mm, aluminum 262.245.03 Glass base, 47 mm 262.245.04 Support screen, 47 mm, stainless steel 262.245.05 Gasket, PTFE 260.245.05 No. 8 perforated stopper, silicone Cat No. Description 074.202.04 Vacuum filtering flask, 1 Ltr 074.202.05 Vacuum filtering flask, 2 Ltr 074.202.07 Vacuum filtering flask, 4 Ltr 074.202.08 Vacuum filtering flask, 5 Ltr 258.245.01A Glass funnel, 500 ml, borosilicate -
APPLICATIONS:
- Used to filter under vacuum/small volumes for particulate or biological contamination analysis
- Available in fritted glass or stainless steel
- Thick prefilters or laminated filters will not seal in this holder
- Use Durapore (PVDF) membrane or unlaminated PTFE for solvent applications with this apparatus
- Borosilicate glass funnel and base; fritted glass filter support; anodized aluminum spring clamp; silicone stopper
- Filter Diameter 25mm
- Filtration Area cm2 2.5
- Funnel Capacity, 15ml
- Outlet Fitting Dimensions : No. 5 perforated silicone stopper mounts in standard 125 ml filtering flask
- Height, 15.2 cm
- Diameter, 2.5 cm
Optional Accessories:Cat. No. Description 259.245.01 Funnel,15 ml, borosilicate glass 259.245.02 Fritted Glass Base with stopper, 25 mm 259.245.03 Spring Clamp, 25 mm, aluminum 259.245.06 No. 5 perforated stopper, silicone Cat. No. Description 259.245.04 Vacuum filtering flask, 125 ml -
APPLICATIONS:
- Used to filter under vacuum/small volumes for particulate or biological contamination analysis
- Available in fritted glass or stainless steel
- Thick prefilters or laminated filters will not seal in this holder
- Use Durapore (PVDF) membrane or unlaminated PTFE for solvent applications with this apparatus
- Borosilicate glass funnel and base; removable stainless steel screen filter support; anodized aluminum spring clamp; silicone stopper
- Filter Diameter 25mm
- Filtration Area cm2Â 2.5
- Funnel Capacity, 15ml
- Outlet Fitting Dimensions : No. 5 perforated silicone stopper mounts in standard 125 ml filtering flask
- Height, 15.2 cm
- Diameter, 2.5 cm
Optional Accessories:Cat. No. Description Price/Piece 259.245.01 Funnel,15 ml, borosilicate glass 1525 259.245.03 Spring Clamp, 25 mm, aluminum 1890 259.245.05 Base stopper & stainless steel screen 2020 259.245.06 No. 5 perforated stopper, silicone 275 259.245.07 Gaskets, Teflon 95 259.245.08 Support Screen, 25 mm, stainless steel 675 Cat. No. Description Price/Piece 259.245.04 Vacuum filtering flask, 125 ml 1000 -
- Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass
- Centrifuge tube shaped receiver with an upper standard taper joint has two glass hooks 180° apart
- Uniform wall Thickness
-
Graduated Pipette (Serological), CLASS-A, SERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- Comes with individual work certificate
-
Graduated Pipette (Serological), CLASS-A, UNSERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- With batch certificate
-
Graduated Pipettes Type 3 (Serological), Class AS
- Compliance with USP Standard
- With batch certificate
-
Graduated Pipette (Serological), CLASS-AS • Calibrated to deliver in compliance with USP Standard • Printed in amber colour enamel • With Individual work certificate
-
Graduated Pipette (Serological), CLASS-B • These Pipettes are manufactured which are calibrated to deliver as per ASTM E-1044 • Printed in amber colour enamel
-
Graduated Pipettes (Mohr), CLASS-A, SERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with Individual work Certificate
-
Graduated Pipettes (Mohr), CLASS A UNSERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with batch certificate
-
Graduated Pipettes (Mohr), CLASS-B These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293 and is printed in amber colour enamel.
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With batch certificate
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With Individual work Certificate
- Printed in amber colour
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • With batch certificate
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • Comes with individual work certificate
-
- Made from ISO/DIN 3585, Class A, TYPE 1 , Boro 3.3 glass
- Complies DIN 12596 standard
* Non DIN
-
- Complies with USP TYPE 1 BORO 3.3 Glass
- With PP Screw cap (GL-45)
- Storage and distribution of HPLC Mobile Phases and Solvents
- Conical Base
- GL45 thread for HPLC transfer plug
- Made of Boro 3.3
- High Chemical resistance
- No tilting and no risk of spillage
- Long-lasting white enamel graduations.
- Retrace Code and certificate of batch traceability
- Large volume tanks for long chromatographic analysis.
- Safer and more convenient alternative to flat bottomed glass media bottles
-
- With circle mark on the top
- Printed with capacity & 20° C
- Without Spout
- With rim
-
- Made of Polypropylene
- Used for convenient filling of carboy's, drums & barrels
-
- Manufactured from PP
- Outstanding chemical resistant
- Autoclavable with maximum operating temp of 135° C
-
- Manufactured from 3.3 Borosilicate glass
- Produce many gases
- User friendly
-
- Flat Flange and Interchangeable Joint
- Made From Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCT’S of 1.5 ml. & and the other can hold 100 MCT’s of 0.5 ml.. These boxes are designed to work at temperatures ranging from -190°C to +121°C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control. Material : Polycarbonate
 -
Â
• Made from Polypropylene • Twin Purpose Rack for both 0.5 ml & 1.5 ml. micro centrifuge tubes • Each side has 108 holes for 0.5 & 1.5 ml. MCT’S, respectively • Transparent top provides an excellent view as well as a protection cover for the tubes stored • Each face of the base has a unique alpha-numeric index for easy identification of the tube -
- With Double Metric Scale, TD (To Delivery)
- Cylinders are made to meet ASTM E 1272 norms
- Printed in white enamel
- All the cylinders from 10ml to 2000ml comes with the bumper guard
-
- With Double Metric Scale, TC (To Contain)
- Cylinders are made to meet ASTM E 1272 norms
- Printed in white enamel
- All the cylinders from 10ml to 2000ml comes with the bumper guard
-
- With Double Metric Scale, TD (To Delivery)
- Cylinders are made to meet ASTM E 1272 norms
- Printed in white enamel
- All the cylinders from 10ml to 2000ml comes with the bumper guard
-
- With Double Metric Scale, TC (To Contain)
- Individual work certificate
- Cylinders are made to meet ASTM E 1272 norms
- Printed in white enamel
- All the cylinders from 10ml to 2000ml comes with the bumper guard
-
- With Double Metric Scale, TD (To Delivery)
- Cylinders are made to meet ASTM E 1272 norms
- Printed in white enamel
- All the cylinders from 10ml to 2000ml comes with the bumper guard
-
- With Double Metric Scale, TC (To Contain)
- Cylinders are made to meet ASTM E 1272 norms
- Printed in white enamel
- All the cylinders from 10ml to 2000ml comes with the bumper guard
-
- Made from Polypropylene
- These are now available with hexagonal base also
- The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really while pouring any reagent
-
- Complies with DIN EN ISO 4788
- With batch certificate
- With protection collor
- Printed in blue colour
* Non DIN
-
- Complies with DIN EN ISO 4788
- With individual work certificate
- With protection collor
- Printed in blue colour
* Non DIN
-
- With protection collar
- Printed in blue colour
-
• Certificate as per DIN EN ISO 4788 • With individual work certificate
* Non DIN
-
• Certificate as per DIN EN ISO 4788 • With conformity batch certificate
* Non DIN
-
- Complies as per DIN EN ISO 4788
- With conformity batch certificate
* Non DIN
-
- With conformity batch certificate
* Non DIn
-
- Complies as per DIN EN ISO 4788
- Hex Base, Class B, To Contain (TC), Single Metric
- Printed in Amber Colour
* Non DIN
-
- Moulded in Polypropylene
- These autoclavable cylinders have raised prominent graduations
- Easy reading and have excellent contact clarity
- The broad base provides good stability
-
- Made from Polypropylene
- These jugs are clear & autoclavable
- Provided with a handle for easy & convenient lifting
- Raised graduation for easy reading
-
- Made of Polypropylene
- Built in plugs make these tubes leakproof
- Used for transmit ting sample for micro analysis
-
- Complies as per DIN EN ISO 4788 standards
- With individual work certificate
- With PE stopper
* Non DIN
-
- Complies as per DIN EN ISO 4788 standards
- With batch conformity certificate
- With PE stopper
* Non DIN
-
- Complies as per DIN EN ISO 4788 standards
- With PE stopper
* Non DIN
-
- Complies as per DIN EN ISO 4788 standards
- With PE stopper
* Non DIN
-
-
Glassco Pasteur Pipettes are manufactured to conform strict specification laid down by research and industrial laboratories and are suitable for various laboratory applications. Common Salient Features:
- Made op of borosilicate glass
- Facilitate controlled drop
- Smooth, straight cut, fire pilished tip (short and long tip )
- Ideal for clinical & industrial use
- Disposable
- Supplied in convenient packing
-
Glassco's Pasteur Pipettes are manufactured to conform strict specification laid down by research and industrial laboratories and are suitable for various laboratory applications. Common Salient Features:
- Made op of borosilicate glass
- Facilitate controlled drop
- Smooth, straight cut, fire pilished tip (short and long tip )
- Ideal for clinical & industrial use
- Disposable
- Supplied in convenient packing
-
- Made of Polypropylene & Polycarbonate
- Used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate
- Middle portion is made of polypropylene
- Tube holding spaces are uniformly placed so as to facilitate the use of multi pipettes
- Racks can be stacked together to save shelf space
-
- These transparent, ready to use, disposable Petri Dishes
- Made of optically clear, non-toxic, polystrene
- These Petri Dishes packed individually in polythylene bags are sterilized by radiation
-
SG Line Petri Dishes
Introduction
A Petri Dish, also known as the Cell Culture Dish, is a shallow cylindrical-shaped round glass used to create a colony of microorganisms and cells. Julius Petri invented the first Petri Dish in 1887 when he realized the need to keep specimens of growing bacteria sterilized.Â
The Petri Dishes are manufactured in Borosilicate Glass, SG Line, and Disposable Plasticware.Â
SG Line Petri DishesÂ
The SG Line Petri Dishes are entirely flat from the inside and have a soda covering on the inner lining. They are bubble-free and have high clarity. The lime obtained from limestone is added to these plates to ensure better chemical durability.Â
These Petri Dishes are highly inert in behavior. They can be sterilized and remain clear even after repeated use and wash. The Soda-Lime Petri Dishes can be recycled and reused by melting them.Â
Characteristics- Highly DurableÂ
- Reasonably HardÂ
- Relatively InexpensiveÂ
- Chemically StableÂ
- High TransparencyÂ
- Ideal for Routine WorkÂ
- Contamination Free
Used AtÂ- Microbiology LaboratoriesÂ
- Botany and AgricultureÂ
- EntomologyÂ
- Chemistry LabsÂ
- CrystallizingÂ
- Cell CultureÂ
- EvaporatingÂ
- DryingÂ
- Sample Storage and Display Â
- AssayÂ
- Contamination Detection and Mapping
Why buy Glassco’s SG Line Petri Dishes?Â
- They come with a transparent air-tight lid that protects the cultures from contamination.Â
- They have an excellent flatness that ensures the accuracy of biological assays.Â
- It is heat as well as chemical resistant to protect the cultures inside.Â
- It has fire-polished rims for easy and safe handling.Â
- These Petri Dishes are bubble-free.Â
- Observations are meticulous because of the clear glass of the petri dish.Â
-
- These Petri Dishes are clear, unbreakable & Autoclavable
- Made from polypropylene
-
Pipette Box
- Made of Polypropylene
- This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
- The top of the box screws on the bot tom and the height can be adjusted by screwing the top.
-
Pipette Controller- Can fill 25 ml pipette under 4 seconds
- Safety valve and hydrophobic filters provide double protection against fluid penetration
- Two different speed modes - High & Low along with Gravity drain
- The pump speed can also be fine-tuned by varying finger pressure on operating knobs for better control of speed
- Cadmium free environment friendly NiMH batteries
- Batteries can be changed very easily by the user
- The intelligent charger prevents over charging / heating of batteries
- Low battery indicator
- The specially designed Desk top Stand enables the Pipette Controller to be charged while resting on it.
- The Pipette Controller can hold the serological pipette while resting on Desk top Stand.
Technical Data:Power : 2 x 1.2 V / 1000 mAh NiMH batteries Battery Service Life : Eight hours continuous use Battery Charging Time : 2 - 3 hours to charge fully Volumetric Range : Plastic or Glass pipette from 0.1 ml up to 200 ml Safety System : Replaceable hydrophobic 0.45 pm PTFE filter Safety check valve Standard Accessory : Battery charger (UK plug) : Desktop Stand : Hydrophobic PTFE membrane filter 0.45 μm 1Pc : Hydrophobic PTFE membrane filter 0.20 μm 1Pc : Wall mounting stand with screw -
Pipette Pump
- Presenting a fast release pipetting device for precise pipetting & zip quick emptying
- The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip- quick emptying
- The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes
- It resists acids & alkalies and can be easily disassembled for thorough cleaning.
-
Pipette Stand (94 Pipettes- Rotary)
- This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
- The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
- The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
- Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
- This stand can be easily disassembled & reassembled.
-
Pipette Stand (Horizontal)
- This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position
- This autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene
- This stand can be easily disassembled for space saving storage.
-
Pipette Stand (Vertical)
- This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
- The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
- The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
- These discs can be adjusted on the rod according to the length of the pipette
- The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
-
Pipette Volumetric, Class-A, Serialized
- These Pipettes are manufactured from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Compliance to ASTM E-969, Standard
- Comes in amber colour enamel printing
- With individual work certificate
-
Pipette Volumetric, Class-A, Unserialized
- These Pipettes are manufactured from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Compliance to ASTM E-969, Standard
- Comes in amber colour enamel printing
- With Batch certificate
-
Pipette Volumetric, Class-B
- These Pipettes are manufactured from ASTM E-438, TYPE-1, CLASS-A, BORO 3.3 GLASS
- Compliance to ASTM E-969, Standard
- Comes in amber colour enamel printing
-
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
Pipettes, Bacteriological, Graduated
- Used for the bacteriological examination of milk
- 1.1 ml is graduated at 0.5 and 1.1 ml
- 2.2 ml is graduated at 1.0, 2.0, 2.1 and 2.2 ml
-
Pipettes, Gerber, Milk (New)
- Used for testing milk by the Gerber method.
- Are one-mark transfer Pipet tes for measuring 10.75 ml
- Also be used in rural Milk Collection Centres
-
- Made of Polypropylene
- Used for transferring powdered reagent
- Unique parallel stem minimizes bridging of powder
- Autoclavable at 120° C
 
