- This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
- The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
- The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
- These discs can be adjusted on the rod according to the length of the pipette
- The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
-
Pipette Stand (Vertical)
-
Pipette Stand (94 Pipettes- Rotary)
- This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
- The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
- The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
- Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
- This stand can be easily disassembled & reassembled.
-
Pipette Stand (Horizontal)
- This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position
- This autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene
- This stand can be easily disassembled for space saving storage.
-
Pipette Pump
- Presenting a fast release pipetting device for precise pipetting & zip quick emptying
- The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip- quick emptying
- The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes
- It resists acids & alkalies and can be easily disassembled for thorough cleaning.
-
Pipette Controller- Can fill 25 ml pipette under 4 seconds
- Safety valve and hydrophobic filters provide double protection against fluid penetration
- Two different speed modes - High & Low along with Gravity drain
- The pump speed can also be fine-tuned by varying finger pressure on operating knobs for better control of speed
- Cadmium free environment friendly NiMH batteries
- Batteries can be changed very easily by the user
- The intelligent charger prevents over charging / heating of batteries
- Low battery indicator
- The specially designed Desk top Stand enables the Pipette Controller to be charged while resting on it.
- The Pipette Controller can hold the serological pipette while resting on Desk top Stand.
Technical Data:Power : 2 x 1.2 V / 1000 mAh NiMH batteries Battery Service Life : Eight hours continuous use Battery Charging Time : 2 - 3 hours to charge fully Volumetric Range : Plastic or Glass pipette from 0.1 ml up to 200 ml Safety System : Replaceable hydrophobic 0.45 pm PTFE filter Safety check valve Standard Accessory : Battery charger (UK plug) : Desktop Stand : Hydrophobic PTFE membrane filter 0.45 μm 1Pc : Hydrophobic PTFE membrane filter 0.20 μm 1Pc : Wall mounting stand with screw -
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
Pipette Box
- Made of Polypropylene
- This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
- The top of the box screws on the bot tom and the height can be adjusted by screwing the top.
-
Pipettes, Gerber, Milk (New)
- Used for testing milk by the Gerber method.
- Are one-mark transfer Pipet tes for measuring 10.75 ml
- Also be used in rural Milk Collection Centres
-
Pipettes, Bacteriological, Graduated
- Used for the bacteriological examination of milk
- 1.1 ml is graduated at 0.5 and 1.1 ml
- 2.2 ml is graduated at 1.0, 2.0, 2.1 and 2.2 ml
-
Graduated Pipette (Serological), CLASS-B • These Pipettes are manufactured which are calibrated to deliver as per ASTM E-1044 • Printed in amber colour enamel
-
Graduated Pipettes (Mohr), CLASS-B These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293 and is printed in amber colour enamel.
-
Graduated Pipette (Serological), CLASS-A, UNSERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- With batch certificate
-
Graduated Pipette (Serological), CLASS-A, SERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- Comes with individual work certificate
-
Graduated Pipettes (Mohr), CLASS A UNSERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with batch certificate
-
Graduated Pipettes (Mohr), CLASS-A, SERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with Individual work Certificate
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With batch certificate
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With Individual work Certificate
- Printed in amber colour
-
Graduated Pipettes Type 3 (Serological), Class AS
- Compliance with USP Standard
- With batch certificate
-
Graduated Pipette (Serological), CLASS-AS • Calibrated to deliver in compliance with USP Standard • Printed in amber colour enamel • With Individual work certificate
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • With batch certificate
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • Comes with individual work certificate
-
- Complies with DIN 12264
- Unprinted sockets to avoid getting printed charred
- Smooth grinding surface finish to avoid leakage
* Non DIN -
- Manufactured from PP
- Outstanding chemical resistant
- Autoclavable with maximum operating temp of 135° C
-
- Made of Polypropylene
- Are corrosion free
- Can hold funnels with dia 3" to 6"
- Extra plate provided can be placed to hold funnels bearing dia 1" to 3"
- Two tapered wedges ensure firm grip on Rods having dia 1/2" or 3/8"
-
- Made of Polypropylene
- Non-corrosive front opening provides clear view of the solution, Allows unobstructed placement of separating funnels.
- Two tapped wedges ensures firm grip on rods having dia 1/2" or 3/5"
-
- Made of Polypropylene
- Provides excellent contact clarity & Strength
- Is per shaped & autoclavable
- has leakproof screw cap threadded
- PP stopcock fitted with self lubricating PTFE plug, is push fitted to the stem of funnels
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- With stem inside cone
-
- Available with PE stopper
- With socket and cone
-
- Available with PE stopper
- With socket and cone
-
- Available with PE stopper
- With socket and cone