- Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass
- Uniform wall Thickness
- Strudy Lip
-
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • Uniform wall Thickness • Strudy Lip
-
- Made of Polypropylene
- Economical substitute for wire racks
- Are autoclavable and stackable when empty
- Available in dif ferent colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water
- Easily disassembling for cleaning purpose
- Base is in the form of a grid with square openings and has fold up sides and end bars that lock in to rack tops
-
• Made of Polycarbonate • Ingenious racks with 3-Tier design provide clear view of the tube contents • Convenient inser ting & removal of tubes • Every par t of raw is coloured & opaque • Are autoclavable and withstand sub-freezing temperatures • Has transparent upper & middle plates where plates
-
- Made of Polypropylene
- Ingenious racks with 3-Tier design provide clear view of the tube contents
- Convenient inser ting & removal of tubes
- Every par t of raw is coloured & opaque
- Are autoclavable and withstand sub-freezing temperatures
-
A handy, lit tle, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm. dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 ver tical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Material : Polypropylene
-
this autoclavable stand is perhaps the most commonly used Test Tube Stand in various laboratories. For bet ter visibility, this 6 place rack is end suppor ted by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six ver tical pins for drying tubes. Material : Polypropylene
-
• Made of Polypropylene • Are autoclavable and non-corrosive • Ideal for rinsing & draining glassware • Useful for storage of test tubes or culture tubes during sterilization or incrubation
-
- Made of borosilicate glass, designed with a flat bot tom
- High thermal shock resistance
- Designed without a rim
- Used for pathological tests and disintegration apparatus
-
• Made from thick walled, mechanically very resistance borosilicate glass • Used in COD Disintegration • Printed in White colour enamel
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
• Compiles with EN ISO-4142 • Without Rim • These tubes come with uniform wall thickness • Excellent heat transfer
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • With Rim EN ISO-4142 • Uniform wall Thickness • Excellent heat transfer
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • Without Rim EN ISO-4142 • Uniform wall Thickness • Excellent heat transfer
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • The uniform Amber colour is highly durable and chemical resistance • Comes with PP Screw Cap & PTFE Liner
PS: Test Tubes in other sizes can be provided on request -
- Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass
- Printed in mat t finish white colour enamel
- Comes with PP Screw Cap & PTFE Liner
- Uniform wall Thickness
-
• The uniform Amber colour is highly durable and chemical resistance • Leakproof • Comes with PP Screw Cap & PTFE Liner
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • With Screw Thread and Teflon Liner • Leakproof • Comes with PP Screw Cap
-
• For ASTM Standard Flasks • The Flasks with ASTM E-288 can also be provided with Penny Head Stoppers PS : Penny Head Stoppers can be provided in Amber color. Prices can be sent on request.
-
- Agronomic Design
- In compliance with Din 12254 standard
- Used mainly with volumetric flasks the F lower-PowerTM form large head provides good grip and also protects flasks from breaking if it drops accidentally
- Available in Multiple Color against Anaquel 100 Pieces
-
Stoppers, Hollow with Tip
- In compliance with Din 12252 standard
- Used on different kind of jointed products like bottles, stoppered cylinder and jointed flasks mainly volumetric flasks.
- Hexagonal head if placed on at head end avoids contamination of ground surface, with hexagonal form head it also helps in preventing the rolling of the stopper and provides a good grip.
- The stoppers below comes in drip tip form also which if placed on the flask helps liquid to return to the flask till the last drop.
-
Pipette Volumetric, Class-B
- These Pipettes are manufactured from ASTM E-438, TYPE-1, CLASS-A, BORO 3.3 GLASS
- Compliance to ASTM E-969, Standard
- Comes in amber colour enamel printing
-
Pipette Volumetric, Class-A, Unserialized
- These Pipettes are manufactured from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Compliance to ASTM E-969, Standard
- Comes in amber colour enamel printing
- With Batch certificate
-
Pipette Volumetric, Class-A, Serialized
- These Pipettes are manufactured from ASTM E-438, TYPE-1, BORO 3.3 GLASS
- Compliance to ASTM E-969, Standard
- Comes in amber colour enamel printing
- With individual work certificate
-
- Compliance with USP standard
- With Batch Certificate
-
Volumetric Pipettes 1 mark, Class AS
- Compliance with USP standard
- With Individual Certificate
-
Volumetric Pipettes, 2 mark, Class AS
- Compliance with DIN ISO 648 Standard
- Printed in Amber Colour
- With Batch Certificate
-
- Compliance with DIN ISO 648 Standard
- Comes in amber colour enamel printing
-
Volumetric Pipettes, 1 mark, Class AS
- With Batch Certificate
- Compliance with DIN ISO 648 Standard
- Comes in amber colour enamel printing
-
Glassco volumetric pipettes are manufactured in compliance with DIN ISO 648 standards. These pipettes are calibrated to deliver (TD, EX) + 20° C . All volumetric pipettes are calibrated by automatic machine and then the final quality check is done on the quality control centre. The volumetric pipettes come in AS Class with conformity batch certificate and Class A in individual work certificate which is printed in amber colour which fuses into the glass . Each pipette is accompanied with a batch or individual certificate in the pack you can also download the certificate from our website : www.glasscolabs.in and by scanning the QR Code from the label of the box. Below is the overview of the one mark pipette explaining in detail the content printed on it.
Volumetric Pipettes, 1 mark, Class AS- With Individual Certificate
- Compliance with ISO 648 Standard
- Comes in amber colour enamel printing
-
Pipette Stand (Vertical)
- This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
- The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
- The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
- These discs can be adjusted on the rod according to the length of the pipette
- The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
-
Pipette Stand (94 Pipettes- Rotary)
- This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
- The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
- The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
- Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
- This stand can be easily disassembled & reassembled.
-
Pipette Stand (Horizontal)
- This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position
- This autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene
- This stand can be easily disassembled for space saving storage.
-
Pipette Pump
- Presenting a fast release pipetting device for precise pipetting & zip quick emptying
- The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip- quick emptying
- The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes
- It resists acids & alkalies and can be easily disassembled for thorough cleaning.
-
Pipette Controller- Can fill 25 ml pipette under 4 seconds
- Safety valve and hydrophobic filters provide double protection against fluid penetration
- Two different speed modes - High & Low along with Gravity drain
- The pump speed can also be fine-tuned by varying finger pressure on operating knobs for better control of speed
- Cadmium free environment friendly NiMH batteries
- Batteries can be changed very easily by the user
- The intelligent charger prevents over charging / heating of batteries
- Low battery indicator
- The specially designed Desk top Stand enables the Pipette Controller to be charged while resting on it.
- The Pipette Controller can hold the serological pipette while resting on Desk top Stand.
Technical Data:Power : 2 x 1.2 V / 1000 mAh NiMH batteries Battery Service Life : Eight hours continuous use Battery Charging Time : 2 - 3 hours to charge fully Volumetric Range : Plastic or Glass pipette from 0.1 ml up to 200 ml Safety System : Replaceable hydrophobic 0.45 pm PTFE filter Safety check valve Standard Accessory : Battery charger (UK plug) : Desktop Stand : Hydrophobic PTFE membrane filter 0.45 μm 1Pc : Hydrophobic PTFE membrane filter 0.20 μm 1Pc : Wall mounting stand with screw -
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
-
Pipette Box
- Made of Polypropylene
- This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
- The top of the box screws on the bot tom and the height can be adjusted by screwing the top.
-
Pipettes, Gerber, Milk (New)
- Used for testing milk by the Gerber method.
- Are one-mark transfer Pipet tes for measuring 10.75 ml
- Also be used in rural Milk Collection Centres
-
Pipettes, Bacteriological, Graduated
- Used for the bacteriological examination of milk
- 1.1 ml is graduated at 0.5 and 1.1 ml
- 2.2 ml is graduated at 1.0, 2.0, 2.1 and 2.2 ml
-
Graduated Pipette (Serological), CLASS-B • These Pipettes are manufactured which are calibrated to deliver as per ASTM E-1044 • Printed in amber colour enamel
-
Graduated Pipettes (Mohr), CLASS-B These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293 and is printed in amber colour enamel.
-
Graduated Pipette (Serological), CLASS-A, UNSERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- With batch certificate
-
Graduated Pipette (Serological), CLASS-A, SERIALIZED
- Calibrated to deliver as per ASTM E-1044
- Printed in amber colour enamel
- Comes with individual work certificate
-
Graduated Pipettes (Mohr), CLASS A UNSERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with batch certificate
-
Graduated Pipettes (Mohr), CLASS-A, SERIALIZED
- These Pipettes are manufactured which are calibrated to deliver as per ASTM E 1293
- Printed in amber colour enamel
- Comes with Individual work Certificate
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With batch certificate
-
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With Individual work Certificate
- Printed in amber colour
-
Graduated Pipettes Type 3 (Serological), Class AS
- Compliance with USP Standard
- With batch certificate
-
Graduated Pipette (Serological), CLASS-AS • Calibrated to deliver in compliance with USP Standard • Printed in amber colour enamel • With Individual work certificate
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • With batch certificate
-
Graduated Pipettes Type 3 (Serological), Class AS • Compliance with ISO 835 Standard • Comes with individual work certificate
-
- Complies with DIN 12264
- Unprinted sockets to avoid getting printed charred
- Smooth grinding surface finish to avoid leakage
* Non DIN -
- Manufactured from PP
- Outstanding chemical resistant
- Autoclavable with maximum operating temp of 135° C
-
- Made of Polypropylene
- Are corrosion free
- Can hold funnels with dia 3" to 6"
- Extra plate provided can be placed to hold funnels bearing dia 1" to 3"
- Two tapered wedges ensure firm grip on Rods having dia 1/2" or 3/8"
-
- Made of Polypropylene
- Non-corrosive front opening provides clear view of the solution, Allows unobstructed placement of separating funnels.
- Two tapped wedges ensures firm grip on rods having dia 1/2" or 3/5"
-
- Made of Polypropylene
- Provides excellent contact clarity & Strength
- Is per shaped & autoclavable
- has leakproof screw cap threadded
- PP stopcock fitted with self lubricating PTFE plug, is push fitted to the stem of funnels
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Complies with DIN 4800 Standards
- Available with PE Stopper
- With socket and cone
-
- With stem inside cone
-
- Available with PE stopper
- With socket and cone
-
- Available with PE stopper
- With socket and cone
-
- Available with PE stopper
- With socket and cone