-
- With reinforced beaded top, coarse porosity fritted disc to support column packing.
- All columns are heavy wall designated to increase safety
-
- Made of Boro 3.3 glass
- Without glass jacket, horizontal and lateral indentations
-
- Made of Boro 3.3 glass
- Without glass jacket, horizontal and lateral indentations
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Compliance with DIN 12581
- Ideal for reflux and comes with glass and plastic screw thread connector
- Inner bulb section provides increased cooling surface and is ideal for Reflux Applications
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Compliance with DIN 12581
- Ideal for reflux and comes with glass and plastic screw thread connector
- Inner bulb section provides increased cooling surface and is ideal for Reflux Applications
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Compliance with DIN 12581
- Ideal for reflux and comes with glass and plastic screw thread connector
- Inner bulb section provides increased cooling surface and is ideal for Reflux Applications
* Non Din
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Comes with Glass connectors and with plastic screw thread connector
- Highly efficient with large cooling surface
- Suitable for Distillation & Reflux Applications.
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Comes with Glass connectors and with plastic screw thread connector
- Highly efficient with large cooling surface
- Suitable for Distillation & Reflux Applications.
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Comes with Glass connectors and with plastic screw thread connector
- Highly efficient with large cooling surface
- Suitable for Distillation & Reflux Applications.
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Comes with Glass connectors and with plastic screw thread connector
- Highly efficient with large cooling surface
- Suitable for Distillation & Reflux Applications.
-
- Available with sealed Inner Tube
- Made from Heat Resistant
- Low Expansion 3.3 Borosilicate Glass
- Complies with ASTM E-428, Type-1, Class-A Boro 3.3 Glass
- Comes with Glass & Plastic screw thread connector
- Highly efficient with large cooling surface
- Suitable for Distillation & Reflux Applications.
-
- Coll style reflux condenser with tightly warpped coil providing maximum cooling
-
- Complies with ASTM E-438, Type-1, Class A, Boro 3.3 Glass
- Compliance with DIN 12581
- Ideal for reflux and comes with glass and plastic screw thread connector
- Inner bulb section provides increased cooling surface and is ideal for Reflux Applications
* Non Din
-
- Compliance with DIN 12591
- Manufactured from ASTM E-438, Type - 1, Class-A, Boro 3.3 Glass
- The condenser comes with plastic screw thread connector
* Non Din
-
- Manufactured from ASTM E-438, Type-1, Class-A
- Made from Boro 3.3 Glass
- This condenser come with glass screw thread connector
-
- Manufactured from ASTM E-438, Type-1, Class-A
- Made from Boro 3.3 Glass
- This condenser come with glass screw thread connector
-
- Compliance with DIN 12591
- Manufactured from ASTM E-438, Type - 1, Class-A, Boro 3.3 Glass
- The condenser comes with plastic screw thread connector
* Non Din
-
- Compliance with DIN 12576
- Drip Tip
- Inter changeable Inner & Outer Joints
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Compliance with ASTM
- Drip Tip
- Inter changeable Inner & Outer Joints
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Compliance with ASTM
- Drip Tip
- Inter changeable Inner & Outer Joints
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Compliance with DIN 12576
- Drip Tip
- Inter changeable Inner & Outer Joints
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Manufactured from ASTM E-438, Type-1, Class-A boro 3.3 Glass
- This condenser come with glass screw thread connector
-
- Manufactured from ASTM E-438, Type-1, Class-A boro 3.3 Glass
- This condenser come with glass screw thread connector
-
- Manufactued from ASTM E-438, Type-1, Class A, Boro 3.3 glass
- These are used for the condensation of material with boiling point above 150° C
PS: All Condensers can be ordered with ASTM Joint Sizes on request
-
- Made from Heat Resistant Low Expansion 3.3 Borosilicate Glass
-
- Drip Tip
- Interchangeable inner and outer, joints
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
- Drip Tip
- Interchangeable inner and outer, joints
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
-
Stopcock Cone with Glass Stopcock PS : The above Adapter can be supplied with PTFE key or PTFE Needle valve Stopcock also. Please ask for prices separately.
-
Cone with Rubber Tubing Right angle connection for attachment of rubber hose. The above Adapter can be supplied with PTFE key or PTFE Needle valve Stopcock also. Please ask for prices separately.
-
Cone with Stem to Rubber Tubing Right angle connection for attachment of rubber hose.
-
- Made from Polycarbonate making it extra strong and autoclavable
- Can accommodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190°C to +121°C
- The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control
-
- Made from Polypropylene
- Used for storage and preservation of frozen samples
- These can withstand ultra low temperature in deep freezers and has removable top lid
- These can be used for upright freezers, drawers & chest freezers with dividers and are laminated.
- Material Polypropylene & Cardboard
-
- Made from Polystyrene
- Available in different colours can easily fit into the cap of Cryo vials for colour identification of different samples
-
- Made from Polypropylene
- Used for storage of Biological material, human & animal cells at temperature as low as -190°C
- These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification
- The cap of these vials is provided with a seal ring inside to make it completely leakproof
- The longitudinal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.
-
- Made from Polypropylene and Polycarbonate
- Both Vacuum & Plain Dessicators are provided with a thick perforated Polypropylene disc with a big hole in the center for easy lifting
- The tiny holes in the disc provide air through & support to the dishes
- However porcelain discs are advisable in case of incandescent crucibles
-
- Made from Polypropylene and Polycarbonate
- Autoclavable vacuum desicators can hold vacuum up to 740 mm of Hg for 24 hrs without any greasing
- Fitted with Polypropylene stopcock with a self lubricating PTFE plug
-
- Die pressed
- Natural Glass with Porcelain perforated plate and Glass Sleeve
-
- Complies with DIN 12336
- Manufactured from Boro 3.3 glass
- High resistance to chemical attack and thermal shock
- Flat base
- Curved sides with spout
-
Disposable Glassware Culture Tube - Boro Glass 5.1 Glassco Disposable culture tubes are resistant to chemical attack and weathering Salient Features:
- Boro Glass 5.1 Expansion offer excellent chemical resistance
- High heat tolerance
- Uniform dimensions
- Convenient dispensing packages
-
Disposable Glassware Culture Tube - Boro Glass 7.0
These tubes are chemically clean and well-suited for general use in chemistry, blood banks, hematology and other laboratory procedures. Salient Features:
- Fire-polished top
- Shrink-film sealed to prevent contamination
- Well-rounded bot toms
Each tube is annealed at temperatures over 426.7°C (800°F) to increase strength and reduce breakage. Tubes feature smooth, well-rounded bot toms with no irregularities. Tops are firepolished to eliminate rough edges. Tubes are packed in lint-free packaging and are shrink-film sealed to prevent any contamination from outside sources.
-
- Borosilicate glass 5.1 expansion construction
- Marking spot and orientation rference mark on all tube
-
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Inter changeable Joints & Stopper
- Flat bottom distillation flask 500 ml 24/29, 19/26
- With Coil condenser 200 mm 19/26
-
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Inter changeable Joints
- With Splash Head 24/29, 19/26
- With Kjeldahl flask 500 ml 24/29
- With Coil condenser 200 mm 19/26
-
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Inter changeable Joints
-
- Moisture Test
- Made from heat resistant, Low Expansion 3.3 Borosilicate Glass
- Round bottom Flask 1000ml: 24/29
- Liebig condenser 300mm-19/26
-
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- Inter changeable Joints & Stopper
-
• Made from Low Density Polyethylene • Dropping Bottles dispense small uniform drops of liquids when pressed lightly
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with PE stopper
- Complies with ISO 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with PE stopper
- Complies with ISO 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with PE stopper
- Complies with ISO 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from DIN ISO 3585, BORO 3.3 GLASS
- With Drip Stem
- Available with stem inside cone
- Complies with DIN 4800 Standards
-
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- For Oil Heavier Than Water
- Round bottom Flask 1000ml: 24/29
- Liebig condenser 300mm-24/29
-
- Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass
- For Oil Lighter Than Water
- Round bottom Flask 1000ml: 24/29
- Liebig condenser 300mm-24/29
-
Expansion Adapter
- Complies as per DIN 12257.
- Big size socket at top and small size at bottom.
-
Glass filter holder assembly, PTFE- coated, with PTFE coated funnel and PTFE coated base, stopper clamp no 8 , 47 mm Disc, Frit Replacement Parts:
Cat No. Description 261.245.01 Funnel, PTFE-faced, 300 ml 261.245.03 Glass base, PTFE-faced, 47 mm 258.245.02 Spring clamp, 47 mm, aluminum 260.245.05 No. 8 perforated stopper, silicone -
- Made from ASTM E-438 type-1 Class A Boro 3.3 glass
-
- Moulded in Polypropylene making it completely corrosion proof
- The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping
- Two tapered wedges are provided to ensure firm grip on rods having dia 1/2” or 3/8”
- Made from Polypropylene
-
- Made From Heat Resistant
- With Interchangeable Stopper
- Suitable for mixing of liquids
- The Amber colour is applied only to the external surface to prevent contamination with
- the testing material
- These flasks can be closed with a glass stopper
- Coloured in Amber to protect light-sensitive material
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- The screw cap is made from Polyethylene which is Autoclavable
- Comes with PTFE Liner.
-
- Made as per ASTM E-1406, type 2 specifications
- These Flasks are made from heavy wall which can withstand high vacuum
- The flasks are printed white colour enamel
-
- With Glass Connector
- Made from heavy wall which can withstand high vacuum
- Printed in white color enamel without Graduation
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Compliance with ASTM E-1403 Standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Compliance with ASTM E-1403 Standard
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Used for Semi Micro Distillation Manufactured
- Complies with DIN 12383
* Non DIN -
- With 2mm glass stopcock and a spring retention device for smooth turning purpose.
-
- Complies with DIN ISO 3585
- Buchner filter flasks with precision-ground quick fit socket
- With traditional plaing glass side-arm to accept 9mm bore vacuum tubing
- Heavy wall and base construction for vacuum work
-
- Made from DIN ISO 3585, Boro 3.3 heat resistance glass
- Compliance with ISO 4797
- With Ground Joint
- Supplied with hollow glass stopper
-
- Made of Polypropylene
- Are Rigid, Translucent & Autoclavable
- Screw cap keeps the contents of flask contamination Free and leakproof
Note: Threads should be disengaged before autoclaving
-
- Made from DIN ISO 3585, Boro 3.3 heat resistance glass
- Compliance with ISO 4797
- With Ground Joint
- Supplied with Penny Head Glass stopper
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Ideal for Use of in preparation of culture
- The four equidistant baffles provide consistent agitation when used with compatible orbital shakers
- Suitable for repeated autoclave cycles at 121°C
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Ideal for Use of in preparation of culture
- The four equidistant baf fles provide consistent agitation when used with compatible orbital shakers
- Suitable for repeated autoclave cycles at 121°C
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- With 19/26 Joint
-
- Made from ASTM E-438 Type 1, Boro 3.3 heat resistance glass
- Complies with ASTM E-133, ASTM D-86, D-233, D-801 & D 802
* Non ASTM