Plasticware
-
Pipette Box
- Made of Polypropylene
- This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
- The top of the box screws on the bot tom and the height can be adjusted by screwing the top.
-
Pipette Stand (94 Pipettes- Rotary)
- This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
- The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
- The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
- Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
- This stand can be easily disassembled & reassembled.
-
Pipette Stand (Vertical)
- This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
- The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
- The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
- These discs can be adjusted on the rod according to the length of the pipette
- The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
-
• Made of Polypropylene • Are autoclavable and non-corrosive • Ideal for rinsing & draining glassware • Useful for storage of test tubes or culture tubes during sterilization or incrubation
-
this autoclavable stand is perhaps the most commonly used Test Tube Stand in various laboratories. For bet ter visibility, this 6 place rack is end suppor ted by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six ver tical pins for drying tubes. Material : Polypropylene
-
A handy, lit tle, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm. dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 ver tical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Material : Polypropylene
-
- Made of Polypropylene
- Ingenious racks with 3-Tier design provide clear view of the tube contents
- Convenient inser ting & removal of tubes
- Every par t of raw is coloured & opaque
- Are autoclavable and withstand sub-freezing temperatures
-
• Made of Polycarbonate • Ingenious racks with 3-Tier design provide clear view of the tube contents • Convenient inser ting & removal of tubes • Every par t of raw is coloured & opaque • Are autoclavable and withstand sub-freezing temperatures • Has transparent upper & middle plates where plates
-
- Made of Polypropylene
- Economical substitute for wire racks
- Are autoclavable and stackable when empty
- Available in dif ferent colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water
- Easily disassembling for cleaning purpose
- Base is in the form of a grid with square openings and has fold up sides and end bars that lock in to rack tops
-
- Made of Polypropylene
- Are Clear Strong & Safe
- Are autoclavable and both printed graduation
- Leakproof
- Can withstand forces upto 7500 x G 15ml & 1200 x G for 50 ml
-
- Made of Polypropylene & Polycarbonate
- Are strong enough to be used upto 50,000xG
- Autoclavable
-
-
- Made of Polypropylene
- These boxes provide substitute for conventional cardboard or foam rack
- These boxes are autoclavable & can withstand Temperature ranging from -90°C to +120°C
-
- Made of Polypropylene
- Built in plugs make these tubes leakproof
- Used for transmit ting sample for micro analysis
-
- Made of Polycarbonate
- Autoclavable
- Made for holding twenty four 1.5 ml. micro centrifuge tubes
- Unique stacking feature prevents movement in any direction
- Holes are numbered & lettered for easy identification.
-
- Made of Polypropylene
- Autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths
- Easy to load
- Essential in microbiology & immunology labs.
- Surface of the rack has raised alpha - numeric index for easy identification and has a ventral rod handle for convenient lifting.
-
are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCT’S of 1.5 ml. & and the other can hold 100 MCT’s of 0.5 ml.. These boxes are designed to work at temperatures ranging from -190°C to +121°C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control. Material : Polycarbonate
-
- Made from Polypropylene
- Used for storage of Biological material, human & animal cells at temperature as low as -190°C
- These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification
- The cap of these vials is provided with a seal ring inside to make it completely leakproof
- The longitudinal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.
-
- Made from Polystyrene
- Available in different colours can easily fit into the cap of Cryo vials for colour identification of different samples
-
- Made from Polycarbonate making it extra strong and autoclavable
- Can accommodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190°C to +121°C
- The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control
-
• Made from Polypropylene • Twin Purpose Rack for both 0.5 ml & 1.5 ml. micro centrifuge tubes • Each side has 108 holes for 0.5 & 1.5 ml. MCT’S, respectively • Transparent top provides an excellent view as well as a protection cover for the tubes stored • Each face of the base has a unique alpha-numeric index for easy identification of the tube -
- Made of Polypropylene & Polycarbonate
- Used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate
- Middle portion is made of polypropylene
- Tube holding spaces are uniformly placed so as to facilitate the use of multi pipettes
- Racks can be stacked together to save shelf space
-
- Made from Polypropylene
- Used for storage and preservation of frozen samples
- These can withstand ultra low temperature in deep freezers and has removable top lid
- These can be used for upright freezers, drawers & chest freezers with dividers and are laminated.
- Material Polypropylene & Cardboard
-
- Made from Polyethylene
- Unbreakable vials are fitted with leakproof screw caps
- These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count
-
- Made from Polypropylene
- Autoclavable & corrosion resistant
- There is an individual rack for both 8 ml. & 20 ml. vials
- These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations
-
- Made from Polypropylene
- These jugs are clear & autoclavable
- Graduation for easy reading
-
- Made from Polypropylene
- These jugs are clear & autoclavable
- Provided with a handle for easy & convenient lifting
- Raised graduation for easy reading
-
• Made from Polypropylene • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leakproof
-
• Made from HDPE • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the HDPE bottle too have excellent strength and are unbreakable • The HDPE Cap has a built in seal ring to make these bottles leakproof
-
• Made from Polypropylene • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leak-proof
-
• Made from HDPE Amber • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leakproof
-
• Made from Low Density Polyethylene • Dropping Bottles dispense small uniform drops of liquids when pressed lightly
-
• Made of Polypropylene and are therefore much lighter than glass • These are autoclavable, durable & dependable • The leakproof spigot screwed to the bottle body requires only a half turn to open or close • These bottles are used for storing or dispensing distilled water & other laboratory solutions • Threads should be totally disengage before autoclaving
-
• Made from Low Density Polyethylene which gives these bottles a translucent & unbreakable character • Solutions can be poured easily by squeezing the bottle lightly • The cap is fit ted with a flexible polyethylene delivery tube which can be aimed wherever required
-
- Made from Low Density Polyethylene and are therefore translucent & unbreakable
- The distinguishing feature that these bottles contain is the built in delivery tubemaking it a one piece Wash Bottle
- These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed
-
Safety Jar for Glass Bottles Glass bottles are clean, dependable containers for liquid but they can present a serious safety hazard when broken. By containing liquid spills and broken glass, the “Safe-Handle” protects people and property from glass shards and exposure to flammable or hazardous liquid.
-
- Moulded in Polypropylene
- These autoclavable cylinders have raised prominent graduations
- Easy reading and have excellent contact clarity
- The broad base provides good stability
-
- Made from Polypropylene
- These are now available with hexagonal base also
- The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really while pouring any reagent
-
- These Petri Dishes are clear, unbreakable & Autoclavable
- Made from polypropylene
-
- Made of Polypropylene
- Are Rigid, Translucent & Autoclavable
- Screw cap keeps the contents of flask contamination Free and leakproof
Note: Threads should be disengaged before autoclaving
-
- Blown in Polypropylene, are strong, unbreakable and have good contact clarity.
- These autoclavable flasks are provided with screw caps to prevent leakage.
- Material : Polypropylene
-
- Made of Polypropylene
- 600 cone angle and external ribs to prevent air lock
- can also be steam autoclaved
-
- Made of Polypropylene
- Used for transferring powdered reagent
- Unique parallel stem minimizes bridging of powder
- Autoclavable at 120° C
-
- Made of Polypropylene
- Used for convenient filling of carboy's, drums & barrels
-
- Made of Polypropylene
- Light weight
- Easy to clean & autoclavable
- Top portion snap fitted with the lower one forms a vaccum seal which requires no greasing
- Base of the top portion has perforated filter plate
-
- Made of Polypropylene
- Provides excellent contact clarity & Strength
- Is per shaped & autoclavable
- has leakproof screw cap threadded
- PP stopcock fitted with self lubricating PTFE plug, is push fitted to the stem of funnels
-
- Made of Polypropylene
- Non-corrosive front opening provides clear view of the solution, Allows unobstructed placement of separating funnels.
- Two tapped wedges ensures firm grip on rods having dia 1/2" or 3/5"
-
- Made of Polypropylene
- Are corrosion free
- Can hold funnels with dia 3" to 6"
- Extra plate provided can be placed to hold funnels bearing dia 1" to 3"
- Two tapered wedges ensure firm grip on Rods having dia 1/2" or 3/8"
-
- Made of Polypropylene
- Useful for stirring different solutions in the laboratory
- Are tough and long lasting
-
- Made of polypropylene
- Prove to be an excellent option for storage of different powdered reagents & other material in the laboratory
- Square shape of these boxes help in saving shell space
- Are autoclavable
- Provide good chemical resistance & heavy duty service
-
- Packed in Polyethylene bag with easy tearing.
- Perforation & Zip lock - Double sealing provides better protection against contamination and spillage while in use
- Free DNase, RNase, Human DNA, Pyrogen & PCR inhibitor
- All Micropipettes come in 1000 Pcs.
-
Bulk Pack :
- Packed in Polyethylene bag with easy tearing.
- Perforation & Zip lock - Double sealing provides better protection against contamination and spillage while in use
- Free DNase, RNase, Human DNA, Pyrogen & PCR inhibitor
- All Micropipettes come in 1000 Pcs.
-
- Packed in Polyethylene bag with easy tearing.
- Perforation & Zip lock - Double sealing provides better protection against contamination and spillage while in use
- Free DNase, RNase, Human DNA, Pyrogen & PCR inhibitor
- All Micropipettes come in 1000 Pcs.
-
- Packed in Polyethylene bag with easy tearing.
- Perforation & Zip lock - Double sealing provides better protection against contamination and spillage while in use
- Free DNase, RNase, Human DNA, Pyrogen & PCR inhibitor
- All Micropipettes come in 1000 Pcs.
