-
- Short Path Distillation Head
-
- Boiling Flask 2 & 10 Ltr
- With Compression Cap
- Used for distillation of large volumes.
- Made from borosilicate 3.3 glass.
- White printing
- Used with Heating Mantle.
-
• For ASTM Standard Flasks • The Flasks with ASTM E-288 can also be provided with Penny Head Stoppers PS : Penny Head Stoppers can be provided in Amber color. Prices can be sent on request.
-
- Complies with DIN 12264
- Unprinted sockets to avoid getting printed charred
- Smooth grinding surface finish to avoid leakage
* Non DIN -
Stoppers, Hollow with Tip
- In compliance with Din 12252 standard
- Used on different kind of jointed products like bottles, stoppered cylinder and jointed flasks mainly volumetric flasks.
- Hexagonal head if placed on at head end avoids contamination of ground surface, with hexagonal form head it also helps in preventing the rolling of the stopper and provides a good grip.
- The stoppers below comes in drip tip form also which if placed on the flask helps liquid to return to the flask till the last drop.
-
- Made of Polyethylene
- Used for storage of biological material, human & animal cells at temperature as low as -190°C
- Cap is provided with a built in seal ring making the vial leakproof
- Base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack
-
- Used with tapped density apparatus to measure bulk density of samples
-
• Made of Polypropylene • Are autoclavable and non-corrosive • Ideal for rinsing & draining glassware • Useful for storage of test tubes or culture tubes during sterilization or incrubation
-
• Compiles with EN ISO-4142 • Without Rim • These tubes come with uniform wall thickness • Excellent heat transfer
-
this autoclavable stand is perhaps the most commonly used Test Tube Stand in various laboratories. For bet ter visibility, this 6 place rack is end suppor ted by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six ver tical pins for drying tubes. Material : Polypropylene
-
• Made of Polycarbonate • Ingenious racks with 3-Tier design provide clear view of the tube contents • Convenient inser ting & removal of tubes • Every par t of raw is coloured & opaque • Are autoclavable and withstand sub-freezing temperatures • Has transparent upper & middle plates where plates
-
- Made of Polypropylene
- Ingenious racks with 3-Tier design provide clear view of the tube contents
- Convenient inser ting & removal of tubes
- Every par t of raw is coloured & opaque
- Are autoclavable and withstand sub-freezing temperatures
-
A handy, lit tle, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm. dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 ver tical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Material : Polypropylene
-
- Made of Polypropylene
- Economical substitute for wire racks
- Are autoclavable and stackable when empty
- Available in dif ferent colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water
- Easily disassembling for cleaning purpose
- Base is in the form of a grid with square openings and has fold up sides and end bars that lock in to rack tops
-
- Made from polypropylene
- Tubes provide excellent option for RIA, Coagulation & Bacteriology etc
- Available with screw cap
-
- Made of borosilicate glass, designed with a flat bot tom
- High thermal shock resistance
- Designed without a rim
- Used for pathological tests and disintegration apparatus
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • With Rim EN ISO-4142 • Uniform wall Thickness • Excellent heat transfer
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • Without Rim EN ISO-4142 • Uniform wall Thickness • Excellent heat transfer
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • Uniform wall Thickness • Strudy Lip
-
Tube, Centrifuge, Conical Shape Made from Boro 7.0 Expansion
-
Tube, Centrifuge, Conical Shape, Graduated • Made from Boro 7.0 Expansion
-
• Made from thick walled, mechanically very resistance borosilicate glass • Used in COD Disintegration • Printed in White colour enamel
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • With Screw Thread and Teflon Liner • Leakproof • Comes with PP Screw Cap
-
• Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass • The uniform Amber colour is highly durable and chemical resistance • Comes with PP Screw Cap & PTFE Liner
PS: Test Tubes in other sizes can be provided on request -
• The uniform Amber colour is highly durable and chemical resistance • Leakproof • Comes with PP Screw Cap & PTFE Liner
-
- Round Bottom
- Made from Boro 7.0
- Printed in Blue colour
-
• Made from Boro 3.3 Glass • With Screw Cap
-
- Made from ASTM E-438 Type-1 Class A, Boro 3.3 glass
- Printed in mat t finish white colour enamel
- Comes with PP Screw Cap & PTFE Liner
- Uniform wall Thickness
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
• Ideal for moisture or air sensitive applications. • Excellent re-sealing capability.
-
- A highly popular set in schools, collages and universities.
- It has been purposely designed to cover the essential requirements for the teaching of organic chemistry and is suitable for preparations up to 30g.
- This is a set which is difficult to beat for versatility.
Item No. Components 27BU/M 1 Pear shaped flask 50ml 1 2 Still head 1 3 Liebig condenser 1 4 Screw cap adapter 1 5 Receiver adapter 1 6 Air leak/steam inlet tube 1 7 Dropping funnel, 50 ml with PTFE Needle Valve Stopcock 1 8 Stopper 1 9 Thermometer 1 -
- This set is ideal for introducing student to the principal techniques of preparative organic chemistry.
- Although the set is very simple a surprising number of preparations on the 30 g scale can be carried out.
Item No. Components 29BU/M 1 Pear shaped flask 50ml 1 2 Still head 1 3 Liebig condenser 1 4 Screw cap adapter 1 5 Receiver adapter 1 -
- For student use in preparation organic chemistry up to the 1501 g scale, this includes all the necessary equipment to allow a wide range of preparation to be carried out
- IT is also invaluable for industrial laboratories where the among of preparative work is not great and may occur at infrequent intervals
- For such applications, this set has the advantage of covering an extensive field of work and occupying little space when not in use
Item No. Components Socket Size Cone size 1 Still head 14/23 19/26 2 Receiver 19/26 24/29 3 Air leak/steam inlet tube - 19/26 4 Liebig condenser 19/26 19/26 5 Dropping funnel, 100 ml 19/26 19/26 6 Reducing adapter 19/26 24/29 7 Multiple adapter 19/26 24/29 8 Flask, R.B., 50 ml 24/29 - 9 Flask, Erlenmeyer, 250 ml 24/29 - 10 Flask, R.B., 250 m 24/29 - 11 Stopper - 19/26 12 Stopper - 19/26 13 Thermometer Pocket - 14/23 14 Receiver adapter 19/26 - 15 Flask, R.B., 100ml 24/29 - 16 Stopper - 24/29 -
- Made of Polypropylene
- Have polypropylene cap with built in seal ring making it a leak proof vial
- Used for the storage of biological material, animal & human cells etc
-
- These flasks are made as per ASTM E-288, Class-A Unserialized Specification
- The flasks have diamond graduated line and are calibrated TC (to contain)
- It comes in white colour enamel printing
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-B
* Non ASTM -
- Blown in Polypropylene, are strong, unbreakable and have good contact clarity.
- These autoclavable flasks are provided with screw caps to prevent leakage.
- Material : Polypropylene
-
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A unserialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- Compliance with DIN/ISO 1042 Standards
- With Individual Work Certificate and Serial Number
- Qr Coded Flask
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Individual Work Certificate and Serial Number
- Qr Coded Flask
- With Glass Hollow Stopper
-
- Compliance with USP (United States Pharmacopia) Standard
- With Individual work Certificate and Serial Number
- Qr Coded Flask
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Batch Certificate
- With Glass Hollow Stopper
-
- Compliance with DIN/ISO 1042 Standards
- With Batch Certificate
- With PE Stopper
-
- Compliance with USP (United States Pharmacopia) Standard
- With Batch Certificate
- With PE Stopper
-
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel
- With Individual work Certificate and Serial Number
* Non ASTM
-
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Individual work Certificate
* Non ASTM -
- These flasks are made as per ASTM E-288, Class-A Serialized specification
- The flasks have diamond graduated line and are calibrated TC (To Contain)
- Printed in white colour enamel & with Batch Certificate
* Non ASTM -
- Compliance with ISO 1042 Standards
- With Hollow glass Stopper
-
- Compliance with ISO 1042 Standards
- With PE Stopper
-
- Compliance with ISO 1042 Standards
- With Hollow glass Stopper
-
- Compliance with ISO 1042 Standards
- With PE Stopper
-
- Compliance with DIN ISO 648 Standard
- Comes in amber colour enamel printing
-
- Compliance with USP standard
- With Batch Certificate
-
Volumetric Pipettes 1 mark, Class AS
- Compliance with USP standard
- With Individual Certificate
-
Volumetric Pipettes, 1 mark, Class AS
- With Batch Certificate
- Compliance with DIN ISO 648 Standard
- Comes in amber colour enamel printing
-
Glassco volumetric pipettes are manufactured in compliance with DIN ISO 648 standards. These pipettes are calibrated to deliver (TD, EX) + 20° C . All volumetric pipettes are calibrated by automatic machine and then the final quality check is done on the quality control centre. The volumetric pipettes come in AS Class with conformity batch certificate and Class A in individual work certificate which is printed in amber colour which fuses into the glass . Each pipette is accompanied with a batch or individual certificate in the pack you can also download the certificate from our website : www.glasscolabs.in and by scanning the QR Code from the label of the box. Below is the overview of the one mark pipette explaining in detail the content printed on it.
Volumetric Pipettes, 1 mark, Class AS- With Individual Certificate
- Compliance with ISO 648 Standard
- Comes in amber colour enamel printing
-
Volumetric Pipettes, 2 mark, Class AS
- Compliance with DIN ISO 648 Standard
- Printed in Amber Colour
- With Batch Certificate
-
• Made from Low Density Polyethylene which gives these bottles a translucent & unbreakable character • Solutions can be poured easily by squeezing the bottle lightly • The cap is fit ted with a flexible polyethylene delivery tube which can be aimed wherever required
-
- Made from Low Density Polyethylene and are therefore translucent & unbreakable
- The distinguishing feature that these bottles contain is the built in delivery tubemaking it a one piece Wash Bottle
- These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed