Plasticware

Plasticware

  • Pipette Box

    100.00
    Pipette Box
    • Made of Polypropylene
    • This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
    • The top of the box screws on the bot tom and the height can be adjusted by screwing the top.

    Polypropylene
  • Pipette Stand (94 Pipettes- Rotary)
    • This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
    • The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
    • The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
    • Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
    • This stand can be easily disassembled & reassembled.
    Material : Polypropylene
    PolypropyleneSpace Saverdisassembled & reassembeled
  • Pipette Stand (Vertical)
    • This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
    • The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
    • The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
    • These discs can be adjusted on the rod according to the length of the pipette
    • The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
    Material : Polypropylene  
    PolypropyleneSpace Saverdisassembled & reassembeled
  • • Made of Polypropylene • Are autoclavable and non-corrosive • Ideal for rinsing & draining glassware • Useful for storage of test tubes or culture tubes during sterilization or incrubation
      Polypropylene  can be heated upto121° C non corrosive basket sterilized
  • this autoclavable stand is perhaps the most commonly used Test Tube Stand in various laboratories. For bet ter visibility, this 6 place rack is end suppor ted by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six ver tical pins for drying tubes. Material : Polypropylene  
      Polypropylene  can be heated upto121° C 25 mm
  • A handy, lit tle, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm. dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 ver tical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Material : Polypropylene
      Polypropylene  can be heated upto121° C Space Saver  19 mm 16 vertical pins
    • Made of Polypropylene
    • Ingenious racks with 3-Tier design provide clear view of the tube contents
    • Convenient inser ting & removal of tubes
    • Every par t of raw is coloured & opaque
    • Are autoclavable and withstand sub-freezing temperatures
     
    Polypropylene can be heated upto121° C Space Saver
  • • Made of Polycarbonate • Ingenious racks with 3-Tier design provide clear view of the tube contents • Convenient inser ting & removal of tubes • Every par t of raw is coloured & opaque • Are autoclavable and withstand sub-freezing temperatures • Has transparent upper & middle plates where plates  
      Polypropylene Polycarbonate can be heated upto121° C Space Saver
    • Made of Polypropylene
    • Economical substitute for wire racks
    • Are autoclavable and stackable when empty
    • Available in dif ferent colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water
    • Easily disassembling for cleaning purpose
    • Base is in the form of a grid with square openings and has fold up sides and end bars that lock in to rack tops
     
        Polypropylene can be heated upto121° C Space Saver lock
  • Polypropylene safe & strong Screw Cap can be heated upto121° C With Graduation  
    • Made of Polypropylene
    • Are Clear Strong & Safe
    • Are autoclavable and both printed graduation
    • Leakproof
    • Can withstand forces upto 7500 x G 15ml & 1200 x G for 50 ml
  • Polypropylene Polycarbonate safe & strong can be heated upto121° C  
    • Made of Polypropylene & Polycarbonate
    • Are strong enough to be used upto 50,000xG
    • Autoclavable
  • Polypropylene safe & strong Screw Cap 4 °C   • Made of Polypropylene • Can be used upto 50,000xG • Screw cap is fit ted with silicone O-ring making ir totally leakproof • Should not be used below 4°C
  • Polypropylene90-120
    • Made of Polypropylene
    • These boxes provide substitute for conventional cardboard or foam rack
    • These boxes are autoclavable & can withstand Temperature ranging from -90°C to +120°C
  • Polypropylene safe & strong transmitted
    • Made of Polypropylene
    • Built in plugs make these tubes leakproof
    • Used for transmit ting sample for micro analysis
  • Polypropyleneeasy to load easy to identify can be heated upto121° C
    • Made of Polycarbonate
    • Autoclavable
    • Made for holding twenty four 1.5 ml. micro centrifuge tubes
    • Unique stacking feature prevents movement in any direction
    • Holes are numbered & lettered for easy identification.
  • Float Rack PP

    100.00
    • Made of Polypropylene
    • Autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths
    • Easy to load
    • Essential in microbiology & immunology labs.
    • Surface of the rack has raised alpha - numeric index for easy identification and has a ventral rod handle for convenient lifting.

      Polypropyleneeasy to loadeasy to identify
  • MCT Box

    100.00
    are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCT’S of 1.5 ml. & and the other can hold 100 MCT’s of 0.5 ml.. These boxes are designed to work at temperatures ranging from -190°C to +121°C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control. Material : Polycarbonate
      Polycarbonate durable  can be heated upto121° C90-120 EXCELLENT CLARITY
  • Cryo Vial PP

    100.00
     
    • Made from Polypropylene
    • Used for storage of Biological material, human & animal cells at temperature as low as -190°C
    • These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification
    • The cap of these vials is provided with a seal ring inside to make it completely leakproof
    • The longitudinal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.

    Polypropylene Screw Cap can be heated upto121° C safe & strong With Graduation bio 90-120 EXCELLENT CLARITY
  • Cryo Coders

    100.00
    Made of polystyrene Screw Cap
    • Made from Polystyrene
    • Available in different colours can easily fit into the cap of Cryo vials for colour identification of different samples
  • Cryo Rack

    100.00
    Polycarbonate durable  can be heated upto121° C
    • Made from Polycarbonate making it tough, durable & autoclavable • Can hold 50 vials at a time • This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index
  • Cryo Box (PC)

    100.00

    • Made from Polycarbonate making it extra strong and autoclavable
    • Can accommodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190°C to +121°C
    • The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control
  • MCT Twin Rack

    100.00
    Polypropylene  can be heated upto121° C
    • Made from Polypropylene • Twin Purpose Rack for both 0.5 ml & 1.5 ml. micro centrifuge tubes • Each side has 108 holes for 0.5 & 1.5 ml. MCT’S, respectively • Transparent top provides an excellent view as well as a protection cover for the tubes stored • Each face of the base has a unique alpha-numeric index for easy identification of the tube
  • PCR Tube Rack

    100.00
    Polypropylene Screw Cap can be heated upto121° C
    • Made of Polypropylene & Polycarbonate
    • Used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate
    • Middle portion is made of polypropylene
    • Tube holding spaces are uniformly placed so as to facilitate the use of multi pipettes
    • Racks can be stacked together to save shelf space
  • Cryo Box PP

    100.00
    Space Saver
    • Made from Polypropylene
    • Used for storage and preservation of frozen samples
    • These can withstand ultra low temperature in deep freezers and has removable top lid
    • These can be used for upright freezers, drawers & chest freezers with dividers and are laminated.
    • Material Polypropylene & Cardboard
  • Polypropylene Screw Cap can be heated upto121° C
    • Made from Polyethylene
    • Unbreakable vials are fitted with leakproof screw caps
    • These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count
  • Polypropylene  can be heated upto121° C
    • Made from Polypropylene
    • Autoclavable & corrosion resistant
    • There is an individual rack for both 8 ml. & 20 ml. vials
    • These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations
  • Screw Thread

    10,000.00

    • Polypropylene

    Polypropylene   adapter gas inlet tube air leak for bushing glass chromatography reservoir claisen head condenser cone skimmer screw thread rubber tubing ruber with stem distillation chemistry vacuum receiver drying expansion flushing washing machine water multiple plastic hose connector pocket thermometer digital hvac infrared dial ir best meat food chef temperature gauge probe test folding instant read temp pin recovery bend reduction rotary evaporator socket to stopcock splash steam sloping still plain t shape straight swan neck flange adaptor connection turnover septa twin connecting 90 degree 90° argon nitrogen adapters cleaner power tool sander shark attachment orbital universal 35mm 32mm reducer 4 nozzle adapter
  •  
           
      adapter gas inlet tube air leak for bushing glass chromatography reservoir claisen head condenser cone skimmer screw thread rubber tubing ruber with stem distillation chemistry vacuum receiver drying expansion flushing washing machine water multiple plastic hose connector pocket thermometer digital hvac infrared dial ir best meat food chef temperature gauge probe test folding instant read temp pin recovery bend reduction rotary evaporator socket to stopcock splash steam sloping still plain t shape straight swan neck flange adaptor connection turnover septa twin connecting 90 degree 90° argon nitrogen adapters cleaner power tool sander shark attachment orbital universal 35mm 32mm reducer 4 nozzle adapter

    • Made from Polypropylene
    • These jugs are clear & autoclavable
    • Graduation for easy reading

         
     

    • Made from Polypropylene
    • These jugs are clear & autoclavable
    • Provided with a handle for easy & convenient lifting
    • Raised graduation for easy reading

    Polypropylene      
     

  • • Made from Polypropylene • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leakproof

  • • Made from HDPE • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the HDPE bottle too have excellent strength and are unbreakable • The HDPE Cap has a built in seal ring to make these bottles leakproof

  • • Made from Polypropylene • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leak-proof

  • • Made from HDPE Amber • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leakproof



    • Made from Polypropylene
    • Autoclavable up to 140° C
    • With Protected Seal

    Polypropylene        

    • Made from Polypropylene
    • Autoclavable up to 140° C

    Polypropylene      
     

    • Made from PTFE (Teflon)
    • Autoclavable

       
  • Dropping Bottles

    10,000.00

    • Made from Low Density Polyethylene • Dropping Bottles dispense small uniform drops of liquids when pressed lightly


  • Aspirator Bottles

    10,000.00

    • Made of Polypropylene and are therefore much lighter than glass • These are autoclavable, durable & dependable • The leakproof spigot screwed to the bottle body requires only a half turn to open or close • These bottles are used for storing or dispensing distilled water & other laboratory solutions • Threads should be totally disengage before autoclaving


         
  • Carboy

    10,000.00

    • Material : Polypropylene, Autoclavable



  • • Material : Polypropylene, Autoclavable



  • Material : Polypropylene, Autoclavable



  • Material : Polypropylene, Autoclavable



  • Material : Polypropylene, Autoclavable


  • Wash Bottles

    10,000.00

    • Made from Low Density Polyethylene which gives these bottles a translucent & unbreakable character • Solutions can be poured easily by squeezing the bottle lightly • The cap is fit ted with a flexible polyethylene delivery tube which can be aimed wherever required
     

    • Made from Low Density Polyethylene and are therefore translucent & unbreakable
    • The distinguishing feature that these bottles contain is the built in delivery tubemaking it a one piece Wash Bottle
    • These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed
     
     

Title

enquire now
  • This field is for validation purposes and should be left unchanged.
Go to Top